Thursday, January 31, 2013

Gotta Love Crafty Sunday Brunches

Challenge 36- DIY Tile Coasters, two attempts with varying degrees of success

One of my favorite people, who I don't see enough, came down for brunch this Sunday. When we were planning for this visit I said we needed to do a craft while she was here. This is the same friend who did the melted crayon art project with me back in August. She told me she already had all of the supplies to try two DIY coaster projects and she would bring them with her. After consuming way to many blueberry pancakes and oven baked bacon (thank you Martha Stewart), we got to work.

The first set of coasters were going to use alcohol ink to make a tie-dyed type look on the coaster. This project calls for all of the ingredients below.
Supplies were bought at Michaels and Home Depot

You take the paint brush and brush on a thin (but not too thin) coat of alcohol onto the tile. You then choose what color alcohol inks you want and start dropping little drops on the tile and watch the alcohol ink meld together in pretty cool patterns.
Mine are the two if the foreground and M's are the one's in the back

A few lessons learned from this is go slow, only use small drops, and make sure you have a good coating of alcohol on the tile. You can tell from the one in the back right what they look like when you don't use enough alcohol. We let these dry for about and hour and then M took them outside to spray with the Rust-Oleum Matte Clear sealer. 
Now to finish these you are supposed to paint the sides of the tile to cover the white and add pads to the bottom to keep them from scratching furniture. M had to leave before the sealer was completely dry so technically these aren't totally complete.
I would recommend two coats of sealer as a few scratches ended up on one of them. These are cool and could be customized with different colors, but still didn't come out quite as nice as the original pin.

The second set of coasters used a more natural stone tile, Mod Podge, and scrapbook paper. These are pretty straight forward. Put Mod Podge on the tile, stick down what ever scrapbook paper you like (cut to the size of the tile), seal the top of the scrapbook paper with more Mod Podge and let it dry. Finish them off with a spray of Rust-Oleum Matte Clear sealer.
Since the tile was natural stone I went pretty liberal with the glue
Fun chevron print (still wet)

 M decided to make her's a bit fancier than mine.

The tiles she bought from came in a pack of eight and five were broken, so we were only able to finish three of this style.

These were even easier than the ink ones (and way less messy), but again they still don't look as nice as the original pin. With a little practice and good scrapbook paper this is a good craft to do as a gift for someone and would be pretty easy for a slightly older kid (maybe 2nd grade and up) to do for a Mother's Day gift or a birthday present for a relative. These were fun to try and were not a fail, but I only be consider them a moderate success.

7 comments:

  1. Don't seal these with Mod Podge when you use paper. If you sit a hot cup on them the heat will peel everything up off the tile. Use Enviro-Tex if you want them to last.

    ReplyDelete
    Replies
    1. You can use polyurethane to seal them also

      Delete
  2. What did you use to drop the acid paint onto the tile with?

    ReplyDelete
    Replies
    1. it's not acid paint..it's alcohol ink..you can get them at Hobby Lobby or Michael's or probably all craft stores. Here, they are $9.00 for three small bottles so I make my own by mixing acrylic paint with alcohol. If you buy it, you just take the lid off and gently squeeze for a drop. My bought bottles always leak after a couple uses. I make my own and mix and keep it in small spray bottles I get at the dollar store and just spray it on the tiles

      Delete
  3. Hi cool idea!! What is the ratio of acrylic paint to 90%?? alcohol??
    Thanks for your response!

    ReplyDelete
    Replies
    1. You take the part with ink our of sharpies or highlighters and let them sit in 91% alcohol to make true alcohol ink. Not acrylic paint.

      Delete
  4. Also, the core of magic markers in 99% IPA (isopropyl alcohol) makes alcohol inks. I just cut up the core part of markers and let sit at least overnight and this gives you alcohol inks. I haven't tried acrylic paint in alcohol. And if you do that recipe, I'd think the higher the alcohol content you can get the better as the acrylic will "dilute" the alcohol content.

    ReplyDelete